EVERY SPOOL. INDIVIDUALLY TESTED.
Every spool of Tasline is tensile tested before it leaves our facility.
Enter the test ID printed on your spool reverse to see the actual breaking strain recorded for your line.
Find your ID on the white sticker hand-written on the spool rear.
Test ID not found in the demo set. Try 10977, 22841 or 30112.
CERTIFIED TEST
#
RATED CLASS
PEAK LOAD
LOAD CURVE
EQUIPMENT CALIBRATED & CERTIFIED
MARK-10 ESM303 SUPPLIED AND CALIBRATED BY IDM INSTRUMENTS.
HOW A SPOOL IS TESTED
01
A calibrated Mark-10 test rig fitted with precision-ground bobbins: no point friction, zero slip. Clamps and knots create artificial weak points that under-read a line's strength; the bobbins spread the load so the sample fails on the fibre, not the fixture.
02
The crosshead pulls at a constant, controlled rate while the load cell samples continuously: hundreds of readings tracing the full load curve. A smooth curve with no early slips is itself proof of a consistent weave.
03
Because nothing slips and nothing binds, failure comes mid-line at the fibre's true limit, not at a grip edge. That recorded peak becomes the spool's certified breaking strain, published permanently under its test ID.
ON EVERY SPOOL TAG
Every spool ships with a numbered white tag. Scan its QR code with your phone camera — it opens this page with your test ID pre-filled — or type the ID in above. Peak load, rated class and the full load curve are published permanently under that ID.
Don't take our word for it. The Line Labatory have put Tasline X8 through the paces, throughly inspecting & testing diameter measurements, breaking strain, abrasion resistance & FG knot strength. Spoiler: they love it!